“Dead” may mean that Windows will not boot, the external drive has no power, or the HDD cannot return data. These states have different recovery options. If files are still readable, copy them first. If no usable storage access can be established, recovery software cannot supply the missing hardware access.
Separate a dead computer from a dead disk
A computer that does not start may have a functioning HDD. Avoid reinstalling Windows or resetting the machine before protecting the files. A qualified person can assess the disk through an appropriate separate connection, or use a rescue environment when the disk remains readable. XRecovery requires paid activation both to create and to use its PE rescue media.
Connecting the disk elsewhere requires matching its interface and power needs. Do not open a laptop or remove a drive unless you can follow its service instructions. For encrypted data, retain the legitimate credentials or recovery key; moving a disk does not remove encryption.
If the HDD was dropped, smells burned, grinds or repeatedly hard-clicks, stop powered tests. Seagate’s internal-drive troubleshooting identifies abnormal mechanical sounds as reasons for caution. Important unique files warrant an assessment before further use.
Establish whether a physical source exists
For an external disk without physical-failure signs, check the original power supply and a known-compatible data cable or direct port. Limit the checks and record each result. A USB bridge can appear in Windows while the HDD behind it remains unavailable.
Look for a correctly sized physical disk in Disk Management. A healthy volume missing a letter, a RAW volume, unallocated space and zero capacity are different observations. Cancel initialization and formatting prompts on previously used media. Do not treat “Windows detected a USB device” as proof that sectors can be read.
If a compatible connection still cannot expose the disk or it repeatedly drops offline, stop switching between software packages. The required data path has not been established. Preserve the original components and discuss hardware-level assessment.
If files can be read, take the direct route
When the volume opens normally, copy irreplaceable folders to another physical device. Start with priority work and avoid moving or deleting anything on the source. Inspect the destination copies and check that linked project assets or companion files were included.
If the disk is stable but files were deleted or the volume will not mount, XRecovery supports file recovery from readable HDD sources, including lost partitions and readable RAW volumes. Scan from an appropriate Windows environment, inspect found content and export to the separate destination.
An image can preserve a stable readable source for later analysis. XRecovery supports IMG creation and supported raw-image scanning. It does not follow that an ordinary imaging attempt can safely stabilize mechanically failing hardware or fill unreadable regions with the original data.
Know what the outcome proves
A spinning drive is not necessarily healthy; a recognized drive is not necessarily readable; an exported file is not necessarily complete. Validate each important output in its normal application and preserve useful copies independently.
If the disk is genuinely inaccessible, use backups or obtain professional assessment. Provide the event history, exact model, symptoms and earlier attempts. Do not replace the circuit board, update firmware or open the sealed HDD as a generic recovery step. The goal is usable files. A step that makes the disk appear active can still damage data you need.