If a USB connector is bent, the board is cracked, or the device has liquid or heat damage, stop powering it. Software recovery requires readable storage; it cannot bridge a broken electrical connection or reconstruct damaged flash hardware. The next useful step is to preserve the device and decide whether a qualified recovery service should assess it.

Describe the damage without testing it repeatedly
Record what happened: impact while plugged in, crushed casing, liquid exposure, sudden heat, or a connector separating from the body. Photograph the outside without opening the casing or bending the connector for a better view. Note the last time the drive worked and which files matter most.
Do not wiggle a damaged plug until it briefly connects, hold a broken board against a port, or solder it without the appropriate equipment and expertise. Intermittent power is not a controlled recovery connection. Liquid-damaged electronics should not be powered merely to check whether they dried.
Keep the original parts together in a dry protective container. If there is a business incident or physical evidence requirement, follow that organization’s handling process. Do not discard the enclosure, detached connector, or labels before an assessor has identified what is relevant.
Explain what a service needs to decide
Give the provider the device model and capacity, damage history, whether it is encrypted, and your prioritized file list. Ask for an assessment of readability, the proposed handling, the cost decision point, and how returned files will be verified. A quotation is not proof of recoverability, and physically repairing a connection does not establish that every flash address is intact.
Use the device manufacturer’s documentation for its particular construction and warranty. Avoid a universal “chip-off always works” promise: some designs integrate components, and controller or encryption dependencies can affect the route. Leave board-level repair and flash extraction to a specialist with appropriate equipment.
Where software still fits
A scratched casing with a sound connector is different from visible electrical damage. If an undamaged device consistently presents the correct capacity and readable data, copy important files to another disk. XRecovery can scan a readable USB for deleted or otherwise missing content and export to a separate device. This applies to a consistently readable device without signs of electrical damage; do not power a visibly damaged connector for a software scan.
If the drive becomes hot, disconnects, or produces repeated read errors, stop that route. A partial copy should be retained and checked; do not overwrite it with another unknown attempt.
Confirm the returned outcome
Ask for files on separate storage, then open the actual documents, images, archives, and recordings you need. Distinguish an intact original, a partial file, and a recovered filename with unusable content. When an original checksum or outside copy exists, compare it. Hardware handling and file verification are separate steps, and neither should be inferred from a drive briefly appearing in Windows.