After an external HDD is dropped, keep it unpowered if the only copy of important files is inside. Do not reconnect it just to see whether it survived, especially if it was operating during the fall or now makes abnormal sounds. A disk that still spins can still be damaged, and a software scan cannot repair mechanical damage.
Record the event without reproducing it
Write down the drive model, whether it was powered, the approximate fall and surface, and any symptoms already observed. Note previous attempts to connect, copy or scan. Do not turn it on again simply to collect a screenshot or audio sample.
Visible damage to the enclosure is useful information, but an intact shell does not prove the internal mechanism is unharmed. Equally, a dent alone does not diagnose which component failed. The assessment should concern the actual device and the data’s importance, not a generic drop-height rule.
Seagate’s hard-drive troubleshooting treats grinding and abnormal repeated mechanical sounds as serious symptoms. Do not interpret a quieter second attempt as evidence that continued testing is safe.
Avoid turning a check into additional damage
Do not shake, strike, freeze or open the HDD. Do not run a benchmark, extended diagnostic, full surface check or several recovery programs on a drive with possible mechanical damage. A read-only scan still causes reading and mechanical operation.
Keep the original enclosure, cable and power supply. Do not casually move the disk to a different enclosure or replace its circuit board. Those actions can introduce new access conditions and obscure the event history without rescuing any files.
If the files are already backed up and validated elsewhere, replacing the drive may be the practical decision. If they are unique, obtain a recovery assessment before deciding whether further powered access is justified.
Prepare for professional evaluation
Provide the event record and a priority list of folders or file types. Explain whether encryption was enabled and retain the authorized recovery key securely; do not place passwords on a label shipped with the disk.
Ask about evaluation terms, authorization before paid recovery, confidentiality, return of the original and how recovered files will be verified. A provider should explain what is known after assessment and what remains uncertain. No credible evaluation can promise every file merely from the model or the fact that the disk was dropped.
Follow the provider’s packing instructions. Immobilize and cushion the unpowered device so it cannot rattle or take another impact during transport. Retain the reference number and record of what was sent.
If files have already been copied
Do not assume a finished copy means the whole disk is safe. Open the destination files and inspect the content relevant to your work. Check required project assets and large files beyond their initial preview. Make another independent copy of the useful data.
If only some files were copied, tell the assessor which ones and which failures occurred; do not keep rereading the original for comparisons. Recovery from a stable acquired image may become appropriate after assessment, but file-recovery software is not a mechanical-repair stage. Decide separately how to recover the files and whether the dropped drive is safe to reuse.